Following on from the ultra-affordable ThermalTake UX100 I have the UX200 ARGB tower cooler. Priced at £29.99 from Scan, this is still an exceptionally affordable cooler, while also offering some impressive ARGB effects.
- Featuring 15 high lumen addressable LEDs with
16.8 million colours, UX200 gives you the vivid RGB lighting experience. Enjoy
the reliable cooling performance and magnificent visual effect with UX200.
- Designed to synchronise with ASUS Aura Sync,
ASRock RGB LED, GIGABYTE RGB Fusion and MSI Mystic Light Sync. UX200 supports
motherboards that have a 5V addressable RGB header, allowing you to control the
- The hydraulic bearing self-lubricates with a
high quality, friction-reducing substance that lowers operation noise and
enhance thermal efficiency. The seal cap prevents leakage of the lubricant and
extends the lifespan of the unit.
- Dimensions – 127 x 76 x 153.5 mm ( L x W x H)
- Fan Specification
- Air pressure- 1.18 mm-H2O
- Acoustic noise – 26.33 dBA
At well more than double the height of the UX200 at 153.5 mm
this cooler will not be appropriate for small form factor PCs. However, it is
still quite small compared to premium air cooling solutions, there is no weight
listed, but it is small and light enough that it shouldn’t be an issue for any
This combines Aluminum Fins and Copper Heatpipes, with a
moderately high airflow fan to achieve a cooling performance good enough for 130
W CPUs. This, therefore, makes this cooler suitable for any mainstream CPU on
The radiator tower and vents taper off at the base to provide
optimal RAM clearance. While I use low profile RAM, there should be no issues
with RAM clearance from what I can tell.
The fan is obviously the selling point of this cooler, and in terms of performance, it sits a touch under the Thermaltake Pure 12 120mm ARGB Fans that are sold separately as radiator fans. However, as it has the LED ring on the outer edge of the fan, the overall LED effect is brighter and more impressive than the Pure 12 fans.
- Intel: LGA 1156/1155/1151/1150/775
- AMD: AM4/AM3+/AM3/AM2+/AM2/FM2/FM1
If you are on the AM4 socket, then fitting this is
exceptionally easy, just like the UX100. However, this model also requires you
to attach a fan, this is help into place with two metal wire mounts similar to
dozens of other coolers on the market.
For AM4 the cooler comes with the bracket already fixed, all
you need to do is apply your past, place it on top of your CPU and push the
hook bits down. It takes a little force, I found it best to rock it a little to
get the first attachment in place, then push down firmly to attach the second
part of the mount.
There are then two cables cable that need plugging in, the
4-pin PWM cable, then the 5v ARGB cable to control the LEDs.
As my test motherboard didn’t have a 5v input I was unable to test the RGB elements of it, but this will work with all the various motherboard control applications and will perform just the same as any other ARGB fan.
The larger nature of this cooler, combined with increased
airflow, and copper pipers, inevitably means this outperforms the UX100 by some
margin, and you should have enough headroom for some overclocking.
Idle temps dropped by around 20% down to just over
30-degrees. In gaming, I saw temperatures drop from about 60-degrees to
40-degrees, so a 30% drop. Stress testing was slightly less impressive, but
still an improvement, the UX100 peaked at 90-degrees while this peaked at
80-degrees, so an 11% drop.
Acoustics also improved by a considerable margin. I don’t have any accurate hardware to test this, so it is all subjective. The UX100 was quieter than a stock cooler, but still quite audible. With this, with the help of the PWM fans at idle, the fans are barely audible, under higher loads things do become louder, but overall they are quieter than both the UX100 and stock.
As usual for Thermaltake, this is well priced for what it
is. If you are a fan of RGB I can’t see any other cooler that comes close to
this in terms of pricing. The Cooler Master Hyper 212 Black Ed. RGB is perhaps
the closest competitor, and that is £10 more, which is a 33% increase.
If you are not fussed about aesthetics, then the £30 price
bracket is quite competitive. The Thermaltake Blue Riing Silent 12 is priced
the same, reasonably attractive while offering superior airflow and
acoustics. Or you can get even more
performance, but sacrifice looks further with the Thermaltake Frio Silent 14.
If you are not restricted by height, then this is a much better
buy than the UX100 providing much more cooling performance, along with
subjectively lower noise levels.
This is the cheapest RGB cooler by a comfortable margin and
therefore it is a superb buy. However, it is worth noting, you leave
performance on the table opting for RGB over the less aesthetic Silent 12 &
Silent 14 solutions by Thermaltake. If I were on a budget, I’d choose
performance over looks, but that is a subjective opinion.
Overall though, if you want an affordable cooler, offering superior cooling and looks compared to the stock cooler, this is an excellent choice.
ThermalTake UX200 ARGB CPU Cooler